Pergolas
Pino
Pino allows mounting on the wall or the ceiling of your current area with the use of special steel hanger parts that are connected over the bearer rail profiles of pergola, without the need of any pole support at the front side.
The aluminum stream profile that is placed in horizontal direction with respect to the product collects the flowing water via the inclination and then transfers it outside from special chain drainage.
- Range
- Pergolas
- Type
- Pergola
- Made in
- Istanbul, Türkiye
01
Method of Use
Especially in those limited areas where placing a pole support is not possible, Pino is presented to you as a unique and elegant solution.
In the Pino model, since there are no stiles for the discharge of water, the drain of water is possible only by the chains that will be tied next to the stream or free fall of the water.
Pino can be manufactured and used in the way of a single module or, by bringing together more than one pergola in the desired direction; it can be used as a multiplex as well.
Technical
Dimensioning
The measurements needed to manufacture Pino:
- A
- Total width
- B
- Total declination
- C
- Pole height
Inclination
Systems should be mounted with at least 4 degrees of inclination from back to front. The fall is what moves water into the gutters instead of letting it stand on the fabric, and from there it leaves through the drainage.
Upper and lower size limits vary by model. Ask us for the limits table before you draw the opening.
Finishes
Aluminium colours
25 standard powder-coat finishes. Anything outside the range can be matched to order.
SI-5987
Fine Structure Matt
SI-6013
Fine Structure Matt
SI-6209
Fine Structure Matt
SI-7046
Telegray Gloss
SI-7656
Perglimmer Matt
SI-7811
Fine Structure Matt
SI-8060
Fine Structure Matt
SI-9006
Fine Structure Matt
SJ-7100
Fine Structure Matt
SJ-8100
Brown Fine Structure Matt
SN-93028
A 59
SN-9403
140 1
SN-9403
C 44
SP-1032
Fine Structure Matt
SP-7016
Antharacite Grey Fine Structure Matt
SP-8019
Grey Brown Fine Structure Matt
SP-9001
Cream Gloss
SP-9005
Fine Structure Matt
SP-9007
Grey Aluminium
SP-9016
White Gloss
SP-9016
White Matt
86-2044
86-2047
86-2167
96-2171
Swatches are indicative on screen and are not a colour match. Ask your dealer for physical chips before specifying a finish.
Planning with Pino?
Choose the systems you are considering, tell us how you want to buy, and our export team will come back with a proposal.